tablo_022_a_pro_jpg

ATyS Bypass solution

ATSE - Automatic equipment from 40 to 3200 A

• Automatic transfer of two supply sources to ensure continuity of supply to critical loads such as sprinklers, elevators, water pumps...
• Guaranteed continuity of the power supply during maintenance and test operations.
• Complete isolation of the Automatic Transfer Switch ensuring maintenance safety.
• The association of an ATyS along with a remote interface ATyS D20, will enable an easy configuration, exploitation and visualisation of the data shown on the front of the equipment (timers settings, hysterisis, start/stop of the genset…).

  • Características

    • From 40 to 3200 A - 4 poles.
    • 230/400 VAC +/- 20%, 50/60 Hz, self-supplied from incoming sources.
    • Normal/Emergency logic control sequence.
    • Voltage and frequency checking of networks I and II.
    • Control of phase rotation.
    • 1 configurable output relay for generator start/stop command.
    • Position I, 0, II control by external dry contact.
    • Manual emergency operation.
    • Auxiliary contacts.
    • MODBUS communication (factory fitted).
    • AUTO / MANU selector.
    • Equipment protection degree: IP41 as standard - Other IP upon request.
    • Hinged door.
    • Wall mounting brackets supplied up to 160 A.
    • Floor standing feet from 250A to 3200 A.
    • Plug-in ATS from 160 A.
    • Phase identification.
    • Mimic panel (3 LEDs; source availability (1 and 2) and load; 16 LED mimic panel optional).
    • Integral protection against direct contact on each functional unit.
    • Steel enclosure
    • Colour: RAL 7035.